For SLS owners
Complete your box
What you pick here is shipped together with your SLS 1:144, with no extra shipping. You only pay for the add-ons.
- 01Tick the add-ons you want.
- 02At checkout, use the email of your SLS order. Code SLSBOX applies itself and brings shipping to zero.
- 03We pack them in your model's box in the workshop, and they ship together.
Official license
The Multi Purpose Habitat at 1:87 scale: the lunar habitat that will house astronauts on the coming Artemis missions, built in Italy by Thales Alenia Space with ASI.
It was born as an institutional gift for the Italian Space Agency. Printed in resin, then sanded, painted and assembled in our workshop, on a plexiglass base with laser-engraved markings, in a box we 3D print and laser engrave ourselves.
Official license
An A6 mission logbook, 105 × 148 mm, with a machined aluminium cover and a ring binding.
We made it for the Italian Space Agency programme. It fits in a pocket, for launch dates, notes and sketches.
Official license
A 500 ml stainless steel water bottle marked with a technical schematic engraved by UV laser, inspired by the MPH and the engineering identity of ASI. No stickers, no print: over an hour of engraving, then deburred and hand-cleaned.
Even the ABS cap is engraved, cleanly and without deforming the plastic.
Orion
Which Orion?
The complete second stage of our SLS 1:144, the part that sends Orion toward the Moon: the interim cryogenic propulsion stage with its engine, the European Service Module, the Orion crew module and the launch abort tower, with a display stand. The solar arrays come in two versions, open and closed.
Finished by hand in our Italian workshop. Core stage and boosters not included.
Orion
Which Orion?
The complete Orion spacecraft at 1:144, the same scale as your SLS: the Orion crew module attached to the European Service Module, with its four solar arrays deployed as they fly in space.
It stands on its own display stand, to show next to your SLS. Finished by hand in our Italian workshop.
The display stand for the European Service Module (ESM) of your SLS 1:144: rod, base and the cradle that holds the ESM. Take the ESM, with the Orion attached, off the top of your SLS and display it on its own, as if in flight, next to the rocket.
ESM and Orion not included: they come with your SLS.
Four Orion solar panels, open as in flight, for the Orion on your SLS 1:144. Your SLS comes with them closed, as at launch.
They are magnetic: they take the place of the closed panels, and you can swap back at any time.
A white MagSafe card wallet with the official Artemis II mission insignia UV-printed on the front and the Space Rocket Lab logo in tone-on-tone grey below it. It snaps magnetically onto the back of any MagSafe iPhone and holds your cards. iPhone not included.
Printed in our lab, to order.
A simulant of the lunar maria, the dark basalt plains on the near side of the Moon, the ones you can see from Earth.
It is the standard grade of the LMS-1E sample that comes with the Founders Edition.
A simulant of the lunar highlands, rich in anorthosite: the pale rock that covers most of the Moon.
The south pole region where Artemis III is set to land is highlands terrain.
A simulant of average Martian soil, built from the Rocknest data: the windblown sand that NASA's Curiosity rover scooped and analysed in Gale Crater in 2012.
Research labs use it as a reference for Martian soil.
A simulant of the ancient river delta in Jezero Crater, where NASA's Perseverance rover has been collecting samples since 2021.
It contains clays, minerals that form in water: one of the reasons Jezero was chosen as the landing site.
The Artemis I mission badge, reproduced as a vinyl sticker, 5 cm wide.
Artemis I flew in November 2022: the SLS, the rocket your model reproduces, sent an uncrewed Orion around the Moon. For a laptop, a toolbox or a helmet.
The official Artemis II mission badge, reproduced as a die-cut vinyl sticker, 5 cm wide. It carries the crew names: Wiseman, Glover, Koch, Hansen.
Artemis II carried four astronauts around the Moon in April 2026, the first crewed flight beyond Earth orbit since Apollo 17.
The red NASA logotype known as the worm, reproduced as a die-cut vinyl sticker.
It was introduced in 1975, retired in 1992 and brought back in 2020. For a laptop, a notebook or a toolbox.
Official license
A sticker collection dedicated to Italy's contribution to the lunar missions, from orbit to the surface.
Premium high-resistance vinyl: it stands up to scratches, everyday wear and UV far better than ordinary stickers.
The Space Rocket Lab mark in orange on a round 25 mm pin, with a metal back and a safety pin.
Official license
The logo of the Italian Space Agency on a round 25 mm pin, with a metal back and a safety pin.
The agency the MPH and the Mission Logbook were made for.
Official license
A keychain that combines different materials for a distinctive result, far from the standard promotional piece.
Careful construction and an engraved detail, in the same technical language as the rest of the ASI line.
The heat shield of Orion seen from below, the grid of blocks that protects the crew capsule on its return from the Moon, on a round 25 mm pin with a metal back.
The red NASA worm logotype on a round 25 mm pin, with a metal back and a safety pin.
Introduced in 1975, retired in 1992, back since 2020.
A die-cut sticker sheet, 145 × 105 mm, with the Orion spacecraft and the patches of its missions.
The Orion crew capsule in 1:144 scale, the same scale as your SLS, with its tiled heat shield. A second capsule to display on its own.
The Orion crew capsule in 1:144 scale, the same scale as your SLS. This is the Orion as it flies to the Moon, with the heat shield covered in aluminium tape for a chrome look.
It is the same version already mounted on your SLS, so this is one more capsule, to display on its own.
The Orion crew capsule in 1:144 scale, the same scale as your SLS. The Orion on your SLS has its heat shield covered and chrome-finished; this one is a different Orion, with the tiled heat shield charred matte black, as it looks after re-entry. A piece to display on its own.
An infinity pencil in black anodized aluminium, engraved with our UV laser. The metal tip writes like graphite and never needs sharpening.
It is the same pencil that comes free with every Founders Edition: this one is in addition to it.
Official license
An infinity pencil in midnight blue anodized aluminium, with the logo of the Italian Space Agency engraved by laser. The metal tip writes like graphite and never needs sharpening.
It is the infinity pencil of the official ASI merchandise, made in the same lab that builds your SLS.
Official license
An infinity pencil in grey anodized aluminium, with the logo of the Italian Space Agency engraved by laser. The metal tip writes like graphite and never needs sharpening.
It is the infinity pencil of the official ASI merchandise, made in the same lab that builds your SLS.
Official license
An infinity pencil in teal anodized aluminium, with the logo of the Italian Space Agency engraved by laser. The metal tip writes like graphite and never needs sharpening.
It is the infinity pencil of the official ASI merchandise, made in the same lab that builds your SLS.
Tick at least one add-on to continue.
No deadline: you can add to your box any time, until we ship your SLS. For anyone who has ordered an SLS 1:144. Questions? Write to info@spacerocketlab.com: a person answers.